当前位置:首页 >> 编程开发 >> Visual C++ >> 内容

用C++Builder开发Windows屏保

时间:2008/1/5 作者:平凡之路 来源:xuhantao.com 浏览:

摘要:本文通过一个具体的程序演示了Windows下的屏幕保护程序的实现过程。

一. 引言

视窗系统下的屏幕保护程序是一个基于命令行(Command Line)的应用程序。当屏保程序被调用时操作系统就用具体的命令行执行该程序。本文组织和处理了所有的命令行,包括“/p”,“/s”,“/c”,“/a”,其中“/p”表示让屏保在预览窗口中显示;“/s”表示真正运行屏保;“/c”表示调用设置对话框;而“/a”表示调用密码设置对话框(WinNT中无效)。本程序尽可能简单地实现一个全功能的屏保,运行Windows的屏保设置程序时你既可以修改密码(WinNT中无效)又可以设置图片显示的频率并把频率数值保存到注册表里。当屏保运行时图片以你设置的频率改变显示位置。笔者还留了个作业给读者,请看图1中的选择图片文件夹这个项目,按下浏览按钮可以设置图片的路径,笔者已经实现了浏览按钮的功能并

把得到的路径也保存到注册表中,并让屏保启动时读picdir的值,picdir等于"no"时的代码笔者已实现了,picdir不等于"no"时的代码由读者实现。也就是让读者实现一个能把picdir目录里的图片轮流显示的屏保程序。

二. 实现方法

首先介绍几个API函数。

WinMain函数:

int WINAPI WinMain(
   HINSTANCE hInstance, // 当前实例句柄
   HINSTANCE hPrevInstance, // 前一个实例句柄
   LPSTR lpCmdLine, // 指向命令行参数的指针(本程序要利用的参数)
   int nCmdShow // 窗口的状态
   );
GetWindowLong函数:得到指定窗口信息的函数
   LONG GetWindowLong(
      HWND hWnd, //窗/口句柄
      int nIndex //指/定返回的信息
     );
SetWindowLong函数:改变窗口属性
   LONG SetWindowLong(
   HWND hWnd, //窗/口句柄
   int nIndex, // 指定要设定的值的信息
   LONG dwNewLong // 新值
   );
SetParent函数:改变指定窗口的父窗口
   HWND SetParent(
   HWND hWndChild, //要/改变父窗体的窗口句柄
   HWND hWndNewParent //新/的父窗体的句柄
   );
GetClientRect函数:得到窗口的客户区
   BOOL GetClientRect(
   HWND hWnd, // 窗口句柄
   LPRECT lpRect //RECT/结构的地址
   );
SetWindowPos函数:改变窗口的大小,位置,顶级窗口等
BOOL SetWindowPos(
HWND hWnd, // 窗口句柄
   HWND hWndInsertAfter, // 布置窗口顺序的句柄(Z order)
   int X, // horizontal position
   int Y, // vertical position
   int cx, // width
   int cy, // height
   UINT uFlags // 窗口位置等标记
   );
SystemParametersInfo函数:访问或设置系统级的参数
   BOOL SystemParametersInfo(
   UINT uiAction, // 指定要获取或设置的系统参数
   UINT uiParam, // depends on action to be taken
   PVOID pvParam, // depends on action to be taken
   UINT fWinIni // 用户配置文件是否改变标记
   );
ShowCursor函数:显示或隐藏光标
int ShowCursor(
BOOL bShow // 鼠标可见度标记 
   );
GetVersion函数:获取系统的版本信息
DWORD GetVersion(VOID)

以上API函数的具体信息可以查找有关MSSDK文档。了解了基本函数后笔者简述一下实现方法。

1. 新建一工程,增加两个窗体,将三个窗体分别取名为MainForm,FrmConfig,FrmControl。在MainForm和FrmControl窗体上各添加一个Timer控件和TImage控件,把两窗体的BorderStyle设为bsNone,背景色设为黑色。在两个窗体的TImage上各加一张图片,FrmControl大小设为:高130像素,宽160像素,Timage的Stretch属性设为真值。FrmConfig的样式如图1。

2. 保存工程文件为screensaver.cpp,其它单元分别存为Unitmain.cpp,

Unitcontrol.cpp,Unitconfig.cpp。

3. 编写代码,具体代码见第三部分的源程序。

4. 编译成可执行文件,并把文件扩展名改为scr。

5. 最后把屏保程序拷贝到windows目录下就可以测试了。如果一切正常的话你将会看

到图片在屏幕上以随机的位置显示。

三. 源代码

以下是本程序的所有的源代码,其中screensaver.cpp, Unitmain.cpp是核心代码。

/*{*******************************}*/
/*{***** screensaver.cpp ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#include
#pragma hdrstop
USERES("screensaver.res");
USEFORM("Unitmain.cpp", Frmmain);
USEFORM("Unitconfig.cpp", FrmConfig);
USEFORM("Unitcontrol.cpp", FrmControl);
//---------------------------------------------------------------------------/
WINAPI WinMain(HINSTANCE, HINSTANCE, LPSTR p, int)//“p"是指向命令行参数的指针
{ String StartType;
  AnsiString Command=p,temp;
  HWND CPWindow =NULL;
  if(Command=="")
   StartType = "/c";
  else
   StartType=Command.SubString(1,2);//获取命令行的前两个参数
     try
     {
          Application->Initialize();
          if(StartType=="/c")//启动设置窗口
           Application->CreateForm(__classid(TFrmConfig), &FrmConfig);
          else if(StartType=="/s")启动屏保
           Application->CreateForm(__classid(TFrmmain), &Frmmain);
          else if(StartType=="/p")//预览
          {
           Application->CreateForm(__classid(TFrmControl), &FrmControl);
           temp=Command.SubString(3,Command.Length()-2);//获取命令行中的屏保预览窗口句柄的字符串形式
           CPWindow =(long *)temp.ToInt();//将预览窗口句柄的字符串形式强制转换为长整形指针
           RECT *lookrect;//建立一个RECT结构指针
           Long style=GetWindowLong(Application->MainForm->Handle,GWL_STYLE);//获取FrmControl窗口的风格
           style=style|WS_CHILD;
           SetWindowLong(Application->MainForm->Handle,GWL_STYLE,style);//设置窗口为子窗口
           SetParent(Application->MainForm->Handle,CPWindow);//设置屏保预览窗口为FrmControl的父窗口
           GetClientRect(CPWindow,lookrect);//获取屏保预览窗口的客户区
           SetWindowPos(Application->MainForm->Handle,HWND_TOP,0,0,lookrect->right,lookrect->bottom ,SW
P_NOZORDER|SWP_NOACTIVATE|SWP_SHOWWINDOW);//将FrmControl的窗口覆盖屏保预览窗口的客户区,并显示它
           }
          else if(StartType=="/a")//启动密码设置窗口
          {
           temp=Command.SubString(3,Command.Length()-2);
           CPWindow =(long *)temp.ToInt();//以下是动态调用mpr.dll里的PwdChangePasswordA函数的过程
           typedef UINT(CALLBACK *FUN)(LPSTR,HWND,UINT,UINT);
           HINSTANCE hDll=LoadLibrary("mpr.DLL");
           FUN myfun;
           if(hDll!=NULL)
           {
            myfun=(FUN)GetProcAddress(hDll,"PwdChangePasswordA");
            if(!myfun)FreeLibrary(hDll);
            else
            myfun("SCRSAVE", CPWindow, 0, 0);//函数的调用
           }
          }
          Application->Run();
     }
     catch (Exception &exception)
     {
          Application->ShowException(&exception);
     }
     return 0;
}
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{*****  Unitmain.h   ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#ifndef UnitmainH
#define UnitmainH
//---------------------------------------------------------------------------/
#include
#include
#include
#include
#include
#include
#include
//---------------------------------------------------------------------------/
class TFrmmain : public TForm
{
__published: // IDE-managed Components
     TTimer *Timer1;
     TImage *Image1;
     void __fastcall FormCreate(TObject *Sender);
     void __fastcall FormKeyDown(TObject *Sender, WORD &Key,
      TShiftState Shift);
     void __fastcall FormMouseDown(TObject *Sender, TMouseButton Button,
      TShiftState Shift, int X, int Y);
     void __fastcall FormCloseQuery(TObject *Sender, bool &CanClose);
     void __fastcall FormClose(TObject *Sender, TCloseAction &Action);
     void __fastcall Image1MouseDown(TObject *Sender,
      TMouseButton Button, TShiftState Shift, int X, int Y);
     void __fastcall Image1MouseMove(TObject *Sender, TShiftState Shift,
      int X, int Y);
     void __fastcall Timer1Timer(TObject *Sender);
private: // User declarations
     DWORD PWProtect;
     DWORD Version;
     String picdir;
     int frequence;
public: // User declarations
     __fastcall TFrmmain(TComponent* Owner);
};
//---------------------------------------------------------------------------/
extern PACKAGE TFrmmain *Frmmain;
//---------------------------------------------------------------------------/
#endif
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{***** Unitmain.cpp  ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#include
#pragma hdrstop
#include
#include "Unitmain.h"
#include
//---------------------------------------------------------------------------/
#pragma package(smart_init)
#pragma resource "*.dfm"
TFrmmain *Frmmain;
//---------------------------------------------------------------------------/
__fastcall TFrmmain::TFrmmain(TComponent* Owner)
     : TForm(Owner)
{
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::FormCreate(TObject *Sender)
{
   //使窗口成为最顶层的窗口
   SetWindowPos(this->Handle, HWND_TOPMOST, 0, 0, 0, 0, SWP_NOMOVE|SWP_NOSIZE);
   //时窗口覆盖屏幕
   this->Width=Screen->Width;
   this->Height=Screen->Height;
   this->Top=0;
   this->Left=0;
   Version=GetVersion();
   TRegistry *Registry = new TRegistry;
  try
  {
   if(Version>0x80000000){
   Registry->RootKey =HKEY_CURRENT_USER;
   Registry->OpenKey("\\Control Panel\\Desktop",false);
   PWProtect=Registry->ReadInteger("ScreenSaveUsePassword");//检测是否密码保护
   Registry->CloseKey();}
   Registry->RootKey =HKEY_CURRENT_USER;
   Registry->OpenKey("\\Software\\CODEHUNTER", true);
   picdir=Registry->ReadString("PicDir");//得到图片目录
   frequence=Registry->ReadInteger("frequence");//得到图像显示的频率
   if(picdir=="")picdir="no";
   if(frequence<0||frequence>6) frequence=2;
   Timer1->Interval=1000*frequence;设置定时器
  }
  __finally
  {
   delete Registry;
   picdir="no";
  }
   //检测是否运行于 NT下
   if(Version!=0)
   if(PWProtect&&Version>0x80000000)//如果系统要求密码保护并此系统为非NT那么把系统设为屏保状态使光标消失
    SystemParametersInfo(SPI_SCREENSAVERRUNNING, 1, 0, 0);
   while (!ShowCursor(false)< -5);
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::FormKeyDown(TObject *Sender, WORD &Key,
    TShiftState Shift)
{
this->Close();
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::FormMouseDown(TObject *Sender,
    TMouseButton Button, TShiftState Shift, int X, int Y)
{
this->Close();
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::FormCloseQuery(TObject *Sender, bool &CanClose)
{
if (PWProtect && Version>0x80000000)
    {
     bool PassChck;
     //显/示光标,并调用密码对话框
     while(!ShowCursor(True) > 5);
     //以/下是VerifyScreenSavePwd函数的动态调用
     typedef UINT(CALLBACK *FUN)(HWND);
           HINSTANCE hDll=LoadLibrary("password.cpl");
           FUN myfun;
           if(hDll!=NULL)
           {
            myfun=(FUN)GetProcAddress(hDll,"VerifyScreenSavePwd");
            if(!myfun)FreeLibrary(hDll);
            else
            PassChck=myfun(this->Handle);
           }
     if(PassChck == false)
      {
       while(!ShowCursor(False) < -5);
       CanClose = false;
       }
    }
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::FormClose(TObject *Sender, TCloseAction &Action)
{
while(!ShowCursor(True) > 5);
   if(PWProtect&&Version>0x80000000)
     SystemParametersInfo(SPI_SCREENSAVERRUNNING, 0, 0, 0);//退出屏保状态
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::Image1MouseDown(TObject *Sender,
    TMouseButton Button, TShiftState Shift, int X, int Y)
{
this->Close();
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::Image1MouseMove(TObject *Sender,
    TShiftState Shift, int X, int Y)
{  static int MouseMoves=0;
   MouseMoves = MouseMoves + 1;
   if(MouseMoves >4)
    {
    this->Close();
    MouseMoves = 0 ;
    }
}
//---------------------------------------------------------------------------/
void __fastcall TFrmmain::Timer1Timer(TObject *Sender)
{
if(picdir=="no")
{
int i ;
randomize();
i=rand()%2;
if(i==0)
i=-1;
else
i=1;
Image1->Top=i*(rand()%this->Height);
Image1->Left=i*(rand()%this->Width);
}
}
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{*****  Unitcontrol.h  ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#ifndef UnitcontrolH
#define UnitcontrolH
//---------------------------------------------------------------------------/
#include
#include
#include
#include
#include
#include
#include
//---------------------------------------------------------------------------/
class TFrmControl : public TForm
{
__published: // IDE-managed Components
     TImage *Image1;
     TTimer *Timer1;
     void __fastcall Timer1Timer(TObject *Sender);
     void __fastcall FormCreate(TObject *Sender);
private: // User declarations
public: // User declarations
     __fastcall TFrmControl(TComponent* Owner);
};
//---------------------------------------------------------------------------/
extern PACKAGE TFrmControl *FrmControl;
//---------------------------------------------------------------------------/
#endif
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{*****  Unitcontrol.cpp ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#include
#pragma hdrstop
#include "Unitcontrol.h"
//---------------------------------------------------------------------------/
#pragma package(smart_init)
#pragma resource "*.dfm"
TFrmControl *FrmControl;
//---------------------------------------------------------------------------/
__fastcall TFrmControl::TFrmControl(TComponent* Owner)
     : TForm(Owner)
{
}
//---------------------------------------------------------------------------/
void __fastcall TFrmControl::Timer1Timer(TObject *Sender)
{
int i ;
randomize();
i=rand()%2;
if(i==0)
i=-1;
else
i=1;
Image1->Top=i*(rand()%this->Height);
Image1->Left=i*(rand()%this->Width);
}
//---------------------------------------------------------------------------/
void __fastcall TFrmControl::FormCreate(TObject *Sender)
{
Image1->Top=0;
Image1->Left=0;
Image1->Height=this->Height ;
Image1->Width=this->Width ;
}
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{*****  Unitconfig.h  ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#ifndef UnitconfigH
#define UnitconfigH
//---------------------------------------------------------------------------/
#include
#include
#include
#include
#include
#include
#include
#include
//---------------------------------------------------------------------------/
class TFrmConfig : public TForm
{
__published: // IDE-managed Components
     TPanel *Panel1;
     TButton *Button1;
     TPanel *Panel2;
     TLabel *Label1;
     TTrackBar *TrackBar1;
     TLabel *Label2;
     TLabel *Label3;
     TLabel *Label4;
     TButton *Button2;
     void __fastcall Button1Click(TObject *Sender);
     void __fastcall Button2Click(TObject *Sender);
private: // User declarations
  AnsiString picdir;
  int frequence;
public: // User declarations
     __fastcall TFrmConfig(TComponent* Owner);
};
//---------------------------------------------------------------------------/
extern PACKAGE TFrmConfig *FrmConfig;
//---------------------------------------------------------------------------/
#endif
//---------------------------------------------------------------------------/
/*{*******************************}*/
/*{*****  Unitconfig.cpp ****}*/
/*{*******************************}*/
//---------------------------------------------------------------------------/
#include
#pragma hdrstop
#include "Unitconfig.h"
//---------------------------------------------------------------------------/
#pragma package(smart_init)
#pragma resource "*.dfm"
TFrmConfig *FrmConfig;
//---------------------------------------------------------------------------/
__fastcall TFrmConfig::TFrmConfig(TComponent* Owner)
     : TForm(Owner)
{
}
//---------------------------------------------------------------------------/
void __fastcall TFrmConfig::Button1Click(TObject *Sender)
{
if(SelectDirectory("Select Picture Dir","",picdir))
   Panel2->Caption=picdir;
}
//---------------------------------------------------------------------------/
void __fastcall TFrmConfig::Button2Click(TObject *Sender)
{
//把信息写入注册表
if(picdir=="") picdir="no";
this->frequence=TrackBar1->Position;
TRegistry *Reg = new TRegistry;
  try
   {
   Reg->RootKey = HKEY_CURRENT_USER;
   if (Reg->OpenKey("\\Software\\CODEHUNTER", true))
   {
    Reg->WriteString("PicDir",picdir);
    Reg->WriteInteger("frequence",frequence);
    Reg->CloseKey();
   }
  }
  __finally
  {
   delete Reg;
  }
this->Close();
}
//---------------------------------------------------------------------------/

相关文章
  • 没有相关文章
共有评论 0相关评论
发表我的评论
  • 大名:
  • 内容:
  • 徐汉涛(www.xuhantao.com) © 2024 版权所有 All Rights Reserved.
  • 部分内容来自网络,如有侵权请联系站长尽快处理 站长QQ:965898558(广告及站内业务受理) 网站备案号:蒙ICP备15000590号-1